DEMANDE DE RMA

DE SUPPORT Fox

PROCESSUS DE SUPPORT

AVEZ-VOUS SUIVI LE PROCESSUS?
Preloader
  • Use Resources

    Please refer to the product user manual and our online technical support resources, including our knowledge base, in the first instance.  Many issues are easily identified and resolved using these tools.  Please attempt to use these tools before proceeding to step two.

  • Contact Support

    If you are unable to resolve the issue using our support documentation, please get in touch with the Fox team.  Calling from the site where the product is installed can often result in a quick resolution and/or identify immediately if the unit is faulty, so please do this where possible.

  • Support Ticket

    Once you have contacted Fox support, and if the issue cannot be resolved following any guidance issued, a support ticket will be created and you will be given a support reference.  Please note down this reference as it will be required for any subsequent RMA request.

  • Warranty Claim

    Only when you have followed the previous steps, and when advised to by Fox Support, should you proceed to apply for a replacement.  This would usually happen only once a Fox technician has confirmed that a replacement is required. Please complete form below.

ÉTAPE 4 - SOUMETTRE UNE DEMANDE DE GARANTIE

Veuillez fournir autant d'informations que possible et assurez-vous que tous les champs obligatoires sont remplis

Page 1 of 6

DÉTAILS DU PRODUIT

Veuillez confirmer que le dépannage préliminaire a été effectué par un installateur solaire qualifié et que les ressources en ligne et / ou le manuel d'utilisation Fox ont été référencés à titre indicatif. L'assistance est disponible auprès de l'équipe d'assistance Fox à l'aide d'outils en ligne et, dans certains pays, d'une assistance téléphonique.

Veuillez sélectionner pour confirmer que vous comprenez le processus de garantie Fox et que vous acceptez les termes et conditions. Les politiques de garantie spécifiques au pays / territoire sont répertoriées au bas de cette page

Should be today's date.
The serial number can be found on the label attached to the side of the product.

Veuillez sélectionner le modèle de produit. En cas de doute, laissez ce champ vide car nous pouvons identifier le modèle à partir du numéro de série fourni.

Warranty Registration

FoxESS offer an online warranty registration facility. This is not essential, however it is recommended and is required for those wishing to benefit from the FoxPlus warranty.

This is not compulsory, however it may help to speed up the replacement process if these details can be provided.

Before filing an RMA request, you need first ensure you have used the FoxESS help resources and have logged a support call with FoxESS, who will have provided you with a support ticket number. Please enter the reference here.

If you have spoken to FoxESS support, but you were not provided with or have lost this reference, please provide details (e.g. the name of the FoxESS representative you spoke to).

Claimant (Installer) Details

RMA requests should only be made by a suitably qualified installer. Please enter your details here. End-user contact and address details are entered on the next page. The installer can be the original installer of the product or any qualified installer sourced by the end-user to oversee the replacement of the product.
Name of the installation company making the claim.
Primary contact at the installation company.

Installer Address

End User Details

Please enter end user details here. Please note, all contact will be with the claimant (installer) only except in exceptional circumstances. The end-user details are for our records only and are not shared with any third-party. As the claimant will be acting on behalf of the end user, please obtain permission of the end user before sharing their details.
Name of the end-user.

End-User Address

Please select to confirm that you have obtained permission from the end-user to share their details.

Fault Details

If there is an error code/status displayed on the inverter screen, or in the log recorded on the remote monitoring platform, please enter here.

If there is an error message displayed on the inverter LCD screen or on the monitoring portal, please specify here.

Have you measured AC voltage at the plug, or recorded it from the inverter status screen, to confirm there has been no loss of mains power, either because of a loss of grid power or because of wiring issues between the incoming mains supply and the inverter?

Have you checked to ensure that there is DC voltage at the plug, or recorded it from the inverter status screen, and have you confirmed that the incoming DC voltage for each MPPT is within the voltage parameters of the inverter?

AC voltage recorded manually at the plug, or read from the inverter status screen/remote monitoring platform.
DC voltage for MPPT1 recorded manually at the plug, or read from the inverter status screen/remote monitoring platform.
DC voltage for MPPT2 recorded manually at the plug, or read from the inverter status screen/remote monitoring platform.

Have you checked the install environment to ensure that the inverter has been installed in accordance with the installation guidelines, that the inverter is not installed in a corrosive environment and that there is sufficient clearance around the inverter as per the guidelines outlined in the installation manual?

Which of the following best describes the location of the inverter?

Please provide a full description of the fault and provide details of any checks or actions taken to rectify the fault.

Supporting Information

Please provide any information to support this request, including any relevant photographs of the product or screenshots from the monitoring platform.

Maximum of 8 files. Maximum file size for each attachment is 10MB. Allowed formats: jpg, jpeg, png, gif, pdf. Please ensure you provide any documentation that has been requested by FoxESS support in response to your support ticket, or alternatively, refer to the knowledgebase for guidance on the types of documents you should upload here.

Address Preference

Subject to the acceptance of this request, a replacement unit will be sent to your preferred address, either the installer address or end-user address entered earlier on this form, please specify.

AVIS IMPORTANT

Avant de soumettre votre demande, veuillez vous assurer que vous avez fait référence à la base de connaissances Fox et à toutes les ressources d’assistance technique fournies par Fox (veuillez vous référer à la procédure d’assistance décrite sur cette page)

REMARQUE AUX UTILISATEURS FINAUX

Dans tous les cas, ce formulaire doit être rempli par votre installateur. Si vous ne pouvez plus contacter votre société d’installation d’origine, nous vous recommandons de contacter un installateur local dûment qualifié qui peut enquêter sur tout problème avant de soumettre une demande RMA. Afin de traiter cette réclamation, des informations seront requises qui nécessitent une visite initiale du site.

APPROBATION

Une fois que vous soumettez une réclamation au titre de la garantie avec les pièces justificatives, vous recevrez une réponse par e-mail avec un numéro RMA.

Fox se réserve le droit de rejeter les demandes RMA:

  • si Fox n’est pas convaincu que le défaut a été causé par un défaut de fabrication ou de matériaux;
  • si le produit est remplacé sans l’accord préalable de Fox
Important Notice

Before submitting your request, please ensure that you have referred to the Fox knowledge-base and any technical support resources provided by Fox (please refer to the support procedure outlined on this page).

Note to End-Users

In all cases, this form should be completed by your installer. Should you no longer be able to contact your original installation company, we recommend contacting a suitably qualified local installer who can investigate any issues prior to submitting an RMA request. In order to process this claim, information will be required that requires an initial site visit.

Approval

Once you submit a warranty claim with supporting documents you will receive an email response with an RMA number.

Fox reserves the right to reject RMA requests:

  • if Fox is not satisfied that the defect was caused by defective workmanship or materials;
  • if the product is replaced without the prior consent of Fox.

FoxESS

Fox est un leader mondial dans le développement d’onduleurs solaires

Maitian Energy Co. Ltd, No.11, Lijiang Road, Xinwu District, Wuxi, China, 214028 +86 (510) 68092998
info@fox-ess.com
sales@fox-ess.com
service@fox-ess.com